A correct selection of the separator considering both material iron, in addition to the characteristics of the iron requirements, use of the environment and the separator itself.
Second, when more iron in the material: it should be used with a continuous row of iron permanent magnet separator
When less iron material: better to use permanent magnetic separator. Appropriate to reduce the suspension height, is conducive to the removal of iron.
Fourth, when the the environment dust more serious: permanent magnetic separator products should be used in fully enclosed structure.
Separator installed in the middle of the belt conveyor (both cross layout): To improve the effect of removing iron, mounted non-magnetic linear increase in the tape roller. Drawer magnets
Separator iron absorption has the following characteristics: to suck large easy short; the vacuum easy ball; Pick-easy-to-static. Should be appropriate to mention the high iron requirements of the occasion,
High-separator specifications or two in addition to iron.
Multi-level addition to iron: after the removal of iron suction should be higher than the previous level in addition to iron suction. Otherwise, the post-stage separator in addition to the iron poor results. lifting magnets
Magnetic pulley, magnetic separator installed in the belt conveyor head: because the material forward momentum and in the loose shape is conducive to the removal of iron.
没有评论:
发表评论