magnechuck cutting process to achieve large distance between some of the better

magnechuck cutting process to achieve large distance between some of the better
Bottom electromagnetic chuck is made, the core, coils, panels, junction boxes composed. Department of surface grinding or milling magnetic bench for various types of magnetic adsorption workpiece, the realization of industrial
The positioning member and grinding. In the actual operation of the electromagnetic chuck, pay attention to the distance between the two devices. In general, from the large number of still relatively good,
There advantage of faster processing of workpieces.
    Spacing between the electromagnetic chuck slightly larger is better. When the spacing between the two magnetic systems electromagnets small eccentricity is large, both with a deadweight electromagnet electromagnet
Almost the same, the work would be extremely unsafe. The pitch can not expand the occasion, the operation should minimize the amount of eccentricity to make work safe and reliable. When using more than
Four electromagnets when lifting, permanent magnet sucker adsorption surface should be carefully adjusted to suit the actual working conditions, there would be not only an individual electromagnet does not work, but also
Will add weight and increase the burden on the other electromagnet.
    For longer difficult to hopper magnet produce steel around the degree of electromagnetic sucker magnet weight-bearing larger, generally using multiple combined. In this way, the level of the suction surface
Very important, should adopt the balance-type two-beam ceiling. Except for special reasons, the use of four electromagnets, so that the hanging chain the accuracy requirements of the class to be small enough to
More convenient practice, commissioning and use. When used in combination of two materials whose spacing is half the length. Seeking to use high temperature material lifting electromagnet, the electromagnet hanging at normal temperature
Shipped at room temperature material is strictly prohibited lifting electromagnet normal temperature high temperature material. Ban will remain in the high-temperature objects electromagnet wait. High electromagnet being sucked down to the temperature of 600 ℃
The following parties may be electromagnet electromagnetic chuck close work, ultra-high temperature solenoid being sucked down to below 700 ℃, the temperature of the magnet close to the work before.