2013年8月1日星期四

drum magnetic separator routine maintenance requirements introduced

drum magnetic separator routine maintenance requirements introduced
General magnetic separation equipment is generally used magnetic source is weak, fast demagnetization ferrite. Ordinary magnetic separator magnetic field is not high enough to suck all the iron ore, building

Mine ran into a magnetic separator, magnetic separator used in ordinary remedies are: To achieve a relatively high magnetic field, the method they use is the multi-layer stack (usually four to five iron

Oxygen), can absorb about 65% of iron, the rest of the magnetic force reach the run away, ferrite drained after about one year about 35%, with the longer magnetic back

The more powerful, further reducing the magnetic force caused a greater waste of resources, run mine problem still has not been effectively resolved. Common separator almost all lines of magnetic force

Four ferrite, magnetic level change, iron ore rollover effect is poor, causing further magnetic surface run mine. Run away not only the mineral resources, it is the investor's investment

The costs increase

The operator should take the initiative to do off, to achieve "two ground", "two prospective."

"Two ground" refers to ground inspection, ground contact. To ground inspection pulp color, size, product quality, water pressure and equipment, etc., in order to be able to detect problems. Attendance

Contact is between the upper and lower step to ground contact, in order to grasp the overall situation. "Two quasi" is the accurate judgment, accurate adjustments. In the "two ground" on the basis of accurate judgments ore

Nature and other factors change and seize the main contradiction, accurate adjustment.

Open parking and common troubleshooting methods:

1: Driving and parking

Driving should process, carried out from the back, parking on the contrary;

Should be checked before driving circuit, gear, etc., confirm that the device can only drive normal;

Drove material, the first after the water supply to the pulp.

2: Common Failures and

Slurry tank into an obstacle, the performance of the cylinder will not turn, tank fibrillation, tube skin scratched and so on, should stop removing obstructions;

Magnetic blocks off the magnetic system, the performance of the cylinder break barrel murmur, should stop and check, repair magnetic system;

Gear bolts loose, dislocation, it is timely to tighten, anteroposterior.

Separator routine maintenance:

To maintain a good separator, everyday should note the following:

Maintain good lubrication condition;

Always check the wear on the drum skin layer, loosening and breakage should be treated in the repair, breakage at the tape and apply sanding cylinder surface clean, then

After glued firmly;

Should be promptly removed the pulp of iron, welding head and stuff, so worn leather tube.

Magnetic device structure varied, common classification methods: magnetic field strength, medium type, mineral particles selected mode, the tank body, the magnetic field types. Magnetic system

Is the core component separator, the production of the magnetic field, magnetic material determines the key recovery. Magnetic system level design techniques and processing means of the continuous progress, is the embodiment of the magnetic

Sorter equipment and technical level of expression.

Magnetic separator for raw materials, mainly through mixing, rolling, crushing, rolling moisture equilibrium is reached after repeated, matching uniform, low gas content, improve the forming rate and forming

Quality of the material through the machine molding products, with high density, good strength, nonporous proportional weight and other characteristics. Energy efficient, high output, the Kai Machinery Plant

Magnetic separator is mainly used for the material to be broken, and then pulverized collect non-ferrous metal equipment. It is widely used with gold, molybdenum election, cement, silicate products, dilute

Nonferrous metal and glass ceramics and other production industries of all kinds of ores and other grind-able materials can be dry or wet grinding. Everything can choose ore mill, magnetic

Sorting machine can be used. This article gives you about magnetic separator equipment for non-ferrous metal sorting.

没有评论:

发表评论