2013年8月14日星期三

Separators use

MC Series with electromagnetic separator is a non-magnetic material used to remove the bulk of the iron pieces electromagnetic devices, usually installed in the conveyor belt or the middle of the head. Powered magnetic force generated by a strong mix of iron in the material pick up after the unloading of iron belt thrown achieve the purpose of automatically cleared. So the series separator is widely used in electric power, mining, metallurgy, building materials, coal, chemical and other departments.
3 Conditions of Use
3.1 Altitude less than 2000m.
3.2 The ambient air magnetic tool holder temperature does not exceed +40 ℃, not lower than -20 ℃.
3.3 for non-explosive and non-corrosive gas environment.
3.4 temperature at 25 ℃ ambient relative humidity less than 90%.
3.5 and outdoor can be used.
4 Model

MC 1 2 ━ 3 4
M - electromagnetic machinery and equipment
C - Separators
  1 - The first digit indicates the shape of the magnetic poles and the number of pole pairs, the meaning of each number as follows: 0 - Round pole 1-1 2-2 pairs of poles for pole
2 - The second digit magnetic coolant separator indicates usage, the meaning of each number is as follows:
1 - ore recovery using 2 - automatic unloading
3 - artificial discharge
3 - Capital Specifications Code:
Diameter circular electromagnet representation (cm); square magnet represents length × width (cm)
Note: The value of magnetic induction is such a requirement - a distance corresponding to the height of the pole hanging rated the geometric center of maximum magnetic flux density (which electromagnetic requires hot).
Magnetic induction unit conversion: 104GS = 1T = 103mT

没有评论:

发表评论